Abs Fault; Asc Switched Off; Asc Fault; Asc Intervention - BMW S 1000 RR Rider's Manual

ABS fault

ABS warning light flashes.
Possible cause:
The ABS control unit has detec-
ted a fault.
You can continue to ride. Bear
in mind that the ABS function
is not available. Bear in mind
the more detailed information
on certain situations that can
lead to ABS fault messages
( 71).
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.

ASC intervention

with Automatic Stability Control
OE
(ASC)
ASC warning light quick-
flashes.
The ASC has detected a degree
of instability at the rear wheel
and has intervened to reduce
torque. The warning light flashes
for longer than ASC intervention
lasts. This affords the rider visual
feedback on control intervention
even after the critical situation
has been dealt with.
ASC self-diagnosis not
completed
with Automatic Stability Control
OE
(ASC)
ASC warning light slow-
flashes.
Possible cause:
Self-diagnosis did not complete,
so the ASC function is not avail-
able. The engine must be run-
ning and the motorcycle must
reach a speed of at least 5 km/h
in order for ASC self-diagnosis to
complete.
Pull away slowly. Bear in mind
that the ASC function is not
available until self-diagnosis has
completed.

ASC switched off

with Automatic Stability Control
OE
(ASC)
ASC warning light flashes.
Possible cause:
The rider has switched off the
ASC system.
Switch on ASC.

ASC fault

with Automatic Stability Control
OE
(ASC)
ASC warning light flashes.
3
31
z