BMW S 1000 RR Rider's Manual page 99

Replacing turn indicator
bulbs, front and rear
with LED turn indicators
The LED flashing turn indic-
ators can be replaced only as
a complete unit. Consult a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
without LED turn indicators
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
OE
Remove screw 1.
OE
Pull the glass out of the re-
flector housing at the threaded-
fastener side.
Turn bulb 1 counter-clockwise
and remove it from the bulb
housing.
Replace the defective bulb.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
Use a clean, dry cloth to hold
the new bulb in order to
keep the glass free of foreign
matter.
7
97
z