Tyres; Headlight - BMW S 1000 RR Rider's Manual

4
52
Press button 1 to view the cur-
rent setting.
To make different adjustment to
z
the damping:
Repeatedly press button 1 until
the setting you want to use
appears on the multifunction
display.
You can adjust the damping
characteristic while the mo-
torcycle is on the move.
The setting shown on the dis-
play is automatically accepted
as the damping characteristic
if you allow a certain length of
time to pass without pressing
button 1.
The ESA indicator disappears
from the display as soon as
adjustment completes.

Tyres

Checking tyre pressure
Incorrect tyre pressures im-
pair the motorcycle's hand-
ling characteristics and increase
the rate of tyre wear.
Always check that the tyre pres-
sures are correct.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Check tyre pressures against
the data below.
Tyre pressure, front
2.5 bar (Tyre cold)
Tyre pressure, rear
2.9 bar (Tyre cold)
If tyre pressure is incorrect:
Correct tyre pressure.

Headlight

Adjusting headlight for
driving on left/driving on
right
If the motorcycle is ridden in a
country where the opposite rule
of the road applies, its asymmet-
ric low-beam headlight will tend
to dazzle oncoming traffic.
Have the headlight set accord-
ingly by a specialist workshop,
preferably an authorised BMW
Motorrad dealer.
Commercially available ad-
hesive tape will damage the
plastic lens of the light.
Consult a specialist workshop,