Removing Front Wheel - BMW F 750 GS Special vehicle 2018 Rider's Manual

the motorcycle's control sys-
tems and consequently cannot
be changed.
If you decide that you would like
to fit non-standard wheels to
your motorcycle, it is very import-
ant to consult a specialist work-
shop beforehand, preferably an
authorised BMW Motorrad Re-
tailer. In some cases, the data
programmed into the control
units can be changed to suit the
new wheel sizes.

Removing front wheel

Place the motorcycle on its
stand on firm, even ground.
Remove screw 1 and remove
the ABS sensor from its bore
hole.
Disengage the cable for the
wheel-speed sensor from hold-
ing clips 2 and 3.
Remove the bolts 4 for the
right-hand brake caliper.
Force the brake pads 3 apart
slightly by rotating the brake
caliper 4 against the brake
disc 5.
Mask off the parts of the wheel
rim that could be scratched in
the process of removing the
brake calipers.
ATTENTION
Unwanted inward movement
of the brake pads
Component damage on attempt
to install the brake caliper or be-
10
209
z