Removing Front Wheel - BMW F 800 ST Rider's Manual

unit as the basis for all neces-
sary calculations. A change in
these sizes due to conversion to
others than the wheels installed
as standard equipment can seri-
ously affect the control comfort
of these systems.
The sensor wheels required for
wheel speed detection must also
match the control systems in-
stalled and may not be replaced.
If you want to equip your mo-
torcycle with different wheels,
please speak to a specialized
workshop, and preferably a BMW
Motorrad retailer. In some cases
the data stored in the control
units can be adapted to the new
wheel sizes.
TPC/RDC sticker
with Tire Pressure Control
OE
(TPC/RDC)
The TPC/RDC sensors can
be damaged in case of im-
proper tire mounting.
Inform the authorized BMW
Motorrad retailer or the
specialized workshop on the fact
that the wheel is equipped with a
TPC/RDC sensor.
On motorcycles equipped with
TPC/RDC, a corresponding
sticker is located on the wheel
rim at the position of the TPC/
RDC sensor. During a tire
change it must be ensured
that the TPC/RDC sensor
is not damaged. Inform the
BMW Motorrad retailer or the
specialized workshop of the TPC/
RDC sensor.

Removing front wheel

Make sure ground is level and
firm and park motorcycle.
with BMW Motorrad ABS
Remove screw 1 and take
speed sensor out of hole.
8
89
OE
z