Running In - BMW S 1000 RR Rider's Manual

ABS self-diagnosis
5
completed
The ABS warning light goes out.
62
Make sure that all the warning
and telltale lights come on in
the pre-ride check.
After the ABS self-diagnosis
completes, an indicator show-
ing an ABS fault will appear.
z
You can continue to ride. Bear
in mind that the ABS function
is not available.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
ASC self-diagnosis
with Automatic Stability Control
(ASC) OE
BMW Motorrad ASC performs
self-diagnosis to ensure its op-
erability. Self-diagnosis is per-
formed automatically when you
switch on the ignition.
Phase 1
Test of the diagnosable system
components with the vehicle at a
standstill.
ASC warning light slow-
flashes.
Phase 2
Test of the diagnosisable system
components while the motor-
cycle is on the move (speed at
least 3.1 mph (5 km/h)).
ASC warning light slow-
flashes.
ASC self-diagnosis
completed
The ASC warning light goes out.
Make sure that all the warning
and telltale lights come on in
the pre-ride check.
After the ABS self-diagnosis
completes, an indicator show-
ing an ABS fault will appear.
You can continue to ride. Bear
in mind that the ASC function
is not available.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.

Running in

Engine
Until the first inspection,
vary the throttle opening and
engine-speed range frequently;
avoid riding at constant engine
rpm for prolonged periods.
Try to do most of your rid-
ing during this initial period on
twisting, fairly hilly roads.
Comply with the rpm limits for

running in.