Front Fog Lamps; Manually Overriding The System; Activating The System - Ford FUSION HYBRID 2015 Owner's Manual

Once the system is active, the high beams
will switch on if:
• the ambient light level is low enough
• there is no traffic in front of the vehicle
• the vehicle speed is greater than
25 mph (40 km/h)
The high beams will switch off if:
• the system detects the headlamps of
an approaching vehicle or the tail
lamps of a preceding vehicle.
• vehicle speed falls below 16 mph
(25 km/h)
• the ambient light level is high enough
that high beams are not required
• the system detects severe rain, snow
or fog
• the camera is blocked

Activating the System

Switch on the system using the information
display and autolamps. See Information
Displays (page 94). See Autolamps
(page 75).
E142451
Switch the lighting control to the
autolamps position.
Fusion/Mondeo (CC7), enUSA
Lighting

Manually Overriding the System

E169254
When the automatic control has activated
the high beams, pushing or pulling the stalk
will provide a temporary override to low
beam.
Use the information display menu to
permanently deactivate the system, or turn
the lighting control switch from autolamps
to headlamps.

FRONT FOG LAMPS

E142453
Press the control to switch the fog lamps
on or off.
You can switch the fog lamps on when the
lighting control is in any position except
Off and the high beams are not on.
78
(If Equipped)