System Not Available; Blocked Sensor - Ford FUSION HYBRID 2015 Owner's Manual

E71621
Detection issues can occur:
A When driving on a different line
than the vehicle in front.
B With vehicles that edge into your
lane. The system can only detect
these vehicles once they move
fully into your lane.
C There may be issues with the
detection of vehicles in front
when driving into and coming out
of a bend or curve in the road.
In these cases, the system may brake late
or unexpectedly. The driver should stay
alert and intervene when necessary.
Fusion/Mondeo (CC7), enUSA
Cruise Control
If something hits the front end of your
vehicle or damage occurs, the
radar-sensing zone may change. This could
cause missed or false vehicle detections.
Contact an authorized dealer to check the
radar for proper coverage and operation.

System Not Available

Conditions that can cause the system to
turn off or prevent the system from turning
on when requested include:
• A blocked sensor.
• High brake temperature.
• A failure in the system or a related
system.

Blocked Sensor

will not function properly when you switch
the system on because the brakes are
electronically controlled. Failing to do so
may result in loss of vehicle control, which
could result in serious injury. The system
does operate with non-electronic trailer
brake controllers, such as over-run or surge
brakes.
system. Failing to do so may result in a loss
of vehicle control, which could result in
serious injury.
E145632
200
WARNINGS
Do not use the system when towing
a trailer with electronic brake
controls. Aftermarket trailer brakes
Do not use tire sizes other than those
recommended because this can
affect the normal operation of the