Charging The High Voltage Battery - Ford FUSION HYBRID 2015 Owner's Manual

E162957
Service disconnect location for Energi
vehicles.
Disabling the High-Voltage Battery
1. Fold down the rear seats.
2. Locate the access door and remove
the plastic cover.
E171514
3. Pull the outer cover off to expose the
service disconnect lever.
E147234
Fusion/Mondeo (CC7), enUSA
High Voltage Battery
170
4. Slide the handle on the service
disconnect outboard to the right. For
Energi vehicles slide the handle
outboard and to the left.
E146133
5. Pull the handle toward you and remove
the circuit from the vehicle to disable
the high-voltage battery.
Reactivating the High-Voltage Battery
Note: If you have manually disconnected
your high-voltage shut off circuit, you will
need to reconnect the circuit before you can
reactivate it. The vehicle will detect if the
electrical system is safe and reactivate
automatically.
CHARGING THE HIGH
VOLTAGE BATTERY
ENERGI VEHICLES
WARNINGS
Do not use the 120 volt convenience
cord with an extension cord,
two-prong adaptor, surge protector,
timer or other adapter.
In Canada, do not use the 120 volt
convenience cord in commercial
garages.