Ford FUSION HYBRID 2015 Owner's Manual page 425

Heater Setting
High Speed
Acceleration
Neutral Gear
Low Gear
Battery Charging
Oil Maintenance (Energi Only)
Batt Temperature (Energi Only)
Normal Operation
Status
This indicates which mode is active within
the vehicle system.
Fusion/Mondeo (CC7), enUSA
MyFord Touch
Engine On due to
422
(If Equipped)
The engine is on because of the heater
setting. Reduce or turn off the heater
setting to return to electric mode.
The engine is on because the vehicle speed
exceeds the level for electric mode opera-
tion. Reduce the speed to return to electric
mode.
The engine is on when applying pressure to
the accelerator pedal or switching on the
speed control. Reduce pressure on the
accelerator pedal or switch off the speed
control to return to full electric mode.
The engine is on because the vehicle is in
neutral gear. Shift out of neutral gear to
return to electric mode.
The engine is on because the vehicle is in
low gear. Shift out of low gear to return to
electric mode.
The engine is on to charge the high-voltage
battery. The vehicle returns to electric mode
once the battery is charged.
The engine is on to maintain engine oil
quality. The vehicle returns to electric mode
when engine oil maintenance is complete.
See Engine Oil Check (page 255).
The engine is on due to high or low high-
voltage battery temperature. This is a
normal operating condition. The vehicle
returns to electric mode automatically
when possible.
The engine is on to optimize vehicle opera-
tion. The vehicle returns to electric mode
when possible.
Hybrid Drive
The electric motor and gasoline engine are
powering vehicle.