Stopping - TOHATSU MFS 15C Owner's Manual

Outboard motor
Hide thumbs Also See for MFS 15C:
Table of Contents

Advertisement

6. Stopping

MF, EF, EFT type
Stop Switch
Stop switch
Lock
① Turn the throttle grip to the slow
position.
② Put the shift lever in the Neutral
position.
Run the engine for 2-3 minutes at
idling speed if it has been running
at full speed.
③ Push the stop switch to stop the
engine or release the stop switch
lock.
WARNING
!
● Do not shift into Reverse during
planning, or control will be lost
leading to serious personal injury,
boat may swamp, and/or hull may
be damaged.
● Do not shift into Reverse during
cruising, or control may be
lost, falling down or causing
passenger(s) to be thrown
overboard. Leading to serious
personal injury, and steering system
and/or shifting mechanism may be
damaged.
ENGINE OPERATION
EP, EPT type
OFF
Stop switch lock
(N)
① Put the shift lever in the Neutral
position and run the engine for 2-3
minutes at idling speed if it has
been running at full speed.
② Turn the main switch key to the
OFF position.
Notes
● After stopping the engine, close the
air vent screw on the tank cap.
● Disconnect the fuel connector of
the engine or the fuel tank.
● Disconnect the battery cord of the EF
or EP type engine, if the engine will
not be used for more than 3 days.
37
ON
START
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents