Starting - TOHATSU MFS 15C Owner's Manual

CAUTION
!
When using EPA approval fuel tank,
only use a primer bulb/hose assembly
that has a Fuel Demand Valve installed
in the fuel hose or a sealing mechanism
in the fuel connector as shown below.
(FDV and fuel connector that has an
sealing mechanism prevent pressurized
fuel from entering the engine and
causing a fuel system overflow or
possible fuel spillage.)
Sealing mechanism in
FDV in fuel hose fuel connector
D o N O T u s e a p r i m e r b u l b / h o s e
assembly that does not contain a Fuel
Demand Valve or a sealing mechanism
as shown below:otherwise overflow the
fuel system or fuel spillage may occor.

3. Starting

① A fter making sure the stop switch
Stop
Switch
Lock
Identification
MF, EF, EFT type
② Place the shift lever in the Neutral
Be sure that the shift is in Neutral
when starting the engine.
This model is provided with start in
gear protection.
ENGINE OPERATION
lock has been installed, connect
the hook to a part of the operator's
body.
Stop
Switch
Lock
Hook
Emergency Stop Line
position.
R
29
6
N
F