TOHATSU MFS 15C Owner's Manual page 60

60 INSPECTION AND MAINTENANCE
Replacing gear oil
!
● Be sure that outboard motor is secured
to transom or service stand, or
accidental drop or fall of outboard motor
could lead to severe personal injury.
● Be sure to lock outboard motor if
it is tilted up, or accidental fall of
outboard motor could lead to severe
personal injury.
● Do not go under outboard motor
tilted up and locked, or accidental
fall of outboard motor could lead to
severe personal injury.
① Remove the oil plugs (upper and
lower), and completely drain the
gear oil into a pan.
10
② Insert the oil tube nozzle into the
lower oil plug hole, and fill with gear
oil by squeezing the oil tube until oil
flows out of the upper plug hole.
!
Do not reuse oil plug gasket. Always use
new gasket and tighten oil plug properly
to prevent entry of water into lower unit.
WARNING
CAUTION
Oil plug (Upper)
③ Install the upper oil plug, and then
remove oil tube nozzle and install
the lower oil plug.
Notes
If water in the oil, giving it a milky
colored appearance. Contact your
dealer.
Notes
Use genuine gear oil or the
recommended one (API GL-5: SAE
#80 to #90).
Required volume: approx. 370 ml.