Control Panel; Customer Interface; Figure 1-1. Powerware 9395 Ups (650-825 Kva) Cabinets - Eaton Powerware 9395 Installation And Operation Manual

INTRODUCTION
1−2
EATON Powerware
ISBM SECTION
1.1.2

Control Panel

The control panel, located on the front of the UPS, contains an LCD and pushbutton
switches to control the operation of the UPS and to display the status of the UPS
system. See Chapter 7, UPS Operating Instructions," for additional information.
1.1.3

Customer Interface

S
Building Alarm Monitoring – Up to five inputs in the UPS are available to connect the
facility's alarm system contacts. Some system configurations may limit the
number of inputs available. The UPS uses these inputs to monitor the building
alarms in addition to the UPS status. See Chapter 8, Communication," for
additional information.
S
Alarm Contact – One alarm contact is provided for connection to equipment at the
facility, such as a light, an audible alarm, or a computer terminal. The equipment
connected to this contact alerts you to a UPS alarm. See Chapter 8,
Communication," for additional information.
S
X−Slot Communication Bays – Four communication bays are standard equipment.
One to four optional X−Slot cards can be installed in the UPS module at any time.
See Chapter 8, Communication," for additional information.
®
9395 UPS (650–825 kVA) Installation and Operation Manual
Figure 1-1. Powerware 9395 UPS (650–825 kVA) Cabinets
S
164201725 Rev 1 www.powerware.com
UPM SECTION