Scan Operation; Scan Types; Com Band Scan - Icom IA14 Instruction Manual

n Scan types
The IC-A14 has 3 scan types to suit your needs. IC-A14S
has 2 scan types.

COM BAND SCAN

108.00 118.00
MHz MHz
Scan
Jump
MEMORY SCAN
non-TAG channel
Mch 2 Mch 4 Mch 6
Mch 1 Mch 7
non-TAG
channel
Mch 19 Mch 10 Mch 8
WEATHER CHANNEL SCAN
Repeatedly scans all "TAG" weather channels. Weather
channels are available for the IC-A14 only.
Repeatedly scans
136.975
a l l f r e q u e n c i e s
MHz
o v e r t h e e n t i r e
COM band.
Repeatedly scans se-
lected memory bank's
all "TAG" memory chan-
nels. Used for checking
often-used channels and
bypassing usually busy
channels such as control-
tower frequencies.

SCAN OPERATION

n COM band scan
q Push [CLR] to select the frequency mode.
w Push [SQLY]/[SQLZ] to set the squelch level to the
point where noise is just muted.
For IC-A14
e Push [FUNC], then push [SCAN](2) to start the scan.
• When a signal is received, the scan pauses until it disappears.
• To change the scanning direction, push [Y]/[Z].
For IC-A14S
e Push and hold [Y]/[Z] for 1 sec. to start the scan.
• When a signal is received, the scan pauses until it disappears.
• To change the scanning direction, push [Y]/[Z].
r To stop the scan, push [CLR].
Decimal point blinks during
scan.
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
[Z] 15
[Y]
16
[CLR]
17
[SCAN](2)
18
[FUNC]
19
18