Key Touch Beep Tone; Anl Function - Icom IA14 Instruction Manual

n Key touch beep tone
The beep tone, which sounds at the push of a switch can be
set, if desired.
For IC-A14
 Push [FUNC] then push [BEEP](8) to turn the key touch
beep tone ON and OFF.
• Key touch beep setting is displayed briefly.
For IC-A14S
q Rotate [VOL] to turn the transceiver power OFF.
w W hile pushing and holding [Y]/[Z], rotate [VOL] to enter
set mode.
e P ush [MR] several times to select the key touch beep
item, "BEEP."
r Push [Y]/[Z] to select the desired condition from ON
and OFF.
t Push [CLR] to return to frequency mode.
OTHER FUNCTIONS
n ANL function
The ANL (Automatic Noise Limiter) function reduces noise
components such as that caused by engine ignition systems
while receiving.
For IC-A14
 Push [FUNC] then push [ANL](1) to turn the ANL func-
tion ON/OFF.
• "ANL" indicator appears when the ANL function is ON.
"ANL" indicator appears when the ANL
function is in use.
For IC-A14S
q Rotate [VOL] to turn the transceiver power OFF.
w W hile pushing and holding [Y]/[Z], rotate [VOL] to enter
set mode.
e P ush [MR] several times to select the ANL item, "ANL."
r Push [Y]/[Z] to select the desired condition from ON
and OFF.
• "ANL" indicator appears when the ANL function is ON.
t Push [CLR] to return to frequency mode.
6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
22