FUNAI ZV427FX4 Owner's Manual page 85

Symptom
There is no sound or the sound is
distorted.
Setup menu cannot be called up.
There is no picture.
Picture noise appears.
There is no sound.
Sound is noisy.
No DTS sound is output.
The disc does not play back.
Discs recorded on this unit cannot be
played back on other DVD players.
The disc does not start playback from
the beginning.
The unit starts playing back the disc
automatically.
Some functions such as stop, search or
slow-motion playback cannot be
performed.
The language for the sound track
cannot be changed.
The subtitle language cannot be
changed or turned off.
The camera angles cannot be
changed.
Recording does not stop immediately
after you press [C].
TROUBLESHOOTING
Remedy
• The HDMI sound is not output when "HDMI Audio" is set to "OFF".
• Check the RCA audio cable connection. If you are using HDMI-DVI
conversion cable, you must connect the RCA audio cable, too.
• Check whether the output format of this unit (HDMI FORMAT) matches
the supported input format of other connected device.
• Setup menus cannot be called up during DVD recording or DVD playback.
• If the main menu appears on the TV screen, press [RETURN] to exit.
• Check if the progressive scan mode is set correctly according to your TV
(page 78).
• Clean the disc with a cleaning cloth.
• If you are using DIGITAL AUDIO OUT (COAXIAL) jack, check the setting in
"Disc Audio" (pages 75-76).
• Clean the disc with a cleaning cloth.
• Clean the disc with a cleaning cloth.
• This unit is not compatible with DTS sound.
• No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the labeled side facing up.
• The disc is not correctly inserted.
• The unit cannot play back certain discs (such as a CD-ROM) (page 44).
• The region code on the DVD-video does not match the unit (page 44).
• Moisture has condensed inside the unit. Remove the disc and leave the
unit turned on for about 2 hours until the moisture evaporates (page 3).
• If the disc was recorded on another recorder, the unit cannot play back
the disc if it was not finalized.
• If you are using DVD-RW/-R, please ensure you finalized the disc after
recording (pages 42-43).
• Resume playback was activated (page 50). Press [C] twice.
• You have inserted a disc whose title menu or DVD menu automatically
appears on the TV screen when it is first inserted.
• The DVD-video features an auto playback function.
• Depending on the disc, you may not be able to do some of the
operations. Refer to the instruction manual supplied with the disc.
• The title does not have the multilingual audio tracks.
• The DVD-video prohibits the changing of the language for the sound
track.
• Multilingual subtitle are not recorded on the DVD-video.
• Multi-angles are not recorded on the DVD-video being played back.
• The angle-change operation is available whenever the disc contains a
multi-angle feature. Actual change will be performed when the feature
comes up.
• The DVD-video prohibits changing angles.
• Try changing the angle using the DVD-video's menu.
• It may take a few seconds for the unit to input disc data before
recording stops.
Instructions continue on the next page.
EN 85