Setting The Clock - FUNAI ZV427FX4 Owner's Manual

Set the clock before you try the timer programming. Follow these steps below.
Press [SETUP] and use [K / L] to
1
select "General Setting", then press
[OK].
"General Setting" menu will appear.
Use [K / L] to select "Clock", then
2
press [OK].
"Clock Setting" menu will appear.
Use [K / L] to select calendar or time,
3
then press [OK].
Clock Setting
JAN / 24 / 2013 ( THU )
12 : 00 AM
Note
• Your setting will be cancelled if you press [SETUP] before pressing [OK] at step 4.
• Your clock setting will be lost if either there is a power failure or this unit has been unplugged for more than 30
seconds when you set the clock manually.
• For setting the day, year, hour, and minute, [the Number buttons] can also be used.
• You can set the built-in calendar from the year 2012 up to 2062.
26 EN EN

SETTING THE CLOCK

{ B] to select an item to set,
4
Use [{ /
and use [K / L] to select the contents
to suit your preference, then press
[OK] when you finish setting all the
contents.
Clock Setting
JAN / 24 / 2013 ( THU )
12 : 00 AM
Your setting will be activated.
The clock start counting when you press [OK].
5
Press [SETUP] to exit.