FUNAI ZV427FX4 Owner's Manual page 32

Use [K / L / s / B] or [the Number
4
buttons] to enter the start and end
time, then press [ B].
Date Start
JAN/11 12 : 00AM
L1/L2 REC To
L1 DVD
• You cannot make a program which recording
time exceeds 12 hours.
Use [K / L] to select the appropriate
5
external input position (L1 / L2) to
which your external tuner is
connected, then press [ B].
Date Start
JAN/11 12 : 00AM
REC To
L1/L2
L1 DVD
Use [K / L] to select the recording
6
media ("DVD" or "VCR"), then press
[ B].
e.g.) recording to DVD
Date Start
JAN/11 12 : 00AM
L1/L2 REC To
L1 DVD
Use [K / L] to select a recording mode.
7
Date Start
JAN/11
12 : 00AM
L1/L2 REC To
L1 DVD
Refer to "Recording Mode" on page 27.
• When recording to DVD, you can check the
remaining recordable space of the disc when
you select the recording mode.
Date Start
JAN/11
12 : 00AM
REC To
L1/L2
DVD
L1
Auto recording mode select (DVD only)...
When "Auto" is selected as a recording mode, the unit
calculates how much time is available on the disc and
selects the best recording mode available
automatically to complete recording the program.
Date
JAN/11
L1/L2
L1
• "Auto" is only available for one program in the timer
program list.
• The recording may be cut short when the available
recording space of the disc is too limited.
32 EN EN
TIMER RECORDING
End
- - : - -
Mode
SP
SP 2:00
End
1 : 00AM
Mode
SP
SP 1:00
End
1 : 00AM
Mode
SP
SP 1:00
End
1 : 00AM
Mode
SP
SP 1:00
End
1 : 00AM
Mode
SP
SP 1:00
Start End
12 : 00AM 1 : 00AM
REC To Mode
DVD Auto
Auto 1:00
8
Press [OK] when all items are entered.
After displaying an instructive message for 10
seconds, timer program list will appear.
Press TIMER SET to Timer Standby mode.
Ensure the external source is tuned to
the correct channel.
When Timer set on DVD or VCR,
it is not available in the standby mode.
Press TIMER SET to cancel the Standby mode.
Timer Programming
JAN/11/13 12:00 AM L1 SP
SP (1:00)
Date Start
JAN/11 12:00AM 1:00AM
Your program setting is now stored.
• To set another program, repeat steps 2 to 8.
• To exit, press [TIMER] or [SETUP].
• When 2 or more programs are overlapped,
"Timer program overlapped" appears, and the
overlapped program will be displayed in blue.
• To correct the timer program refer to
"Checking, canceling or correcting the timer
programming information" on page 33.
9
Press [TIMER SET] to set a timer
programming.
will appear on the front panel display, while
this unit waits to make the recording.
CS
"VCR" will appear on the front panel display if
VCR timer recording have been set.
THU JAN/10 11:00AM
End L1/L2
L1
DR CD
HDD
DVD