One-Touch Timer Recording (Otr); Index Search - FUNAI ZV427FX4 Owner's Manual

One-touch Timer Recording (OTR)

This feature allows you to set the recording length simply
by pressing [REC] on the remote control.
Press [VCR] first.
1) Insert a recordable tape with an erase-protection
tab intact.
2) Select the recording mode using [REC MODE].
(Refer to "Note for DVD to VCR duplication" on page 40
and "Recording" on page 81.)
3) Press [INPUT SELECT] to select the appropriate
external input position (L1/L2) to which your
external tuner is connected.
4) Press [REC] to begin the one-touch timer recording.
You can select a fixed recording time by pressing
[REC] repeatedly.
(Normal recording)
(8:00)
When the one-touch timer recording is finished, the
unit will turn to the standby mode automatically.
To change the recording length during the one-
touch timer recording:
Press [REC] repeatedly until the desired length appear.
To cancel the one-touch timer recording within the
specified time:
Press [C].
Note
• The remaining recording time will be displayed on the
front panel display during one-touch timer recording.
Press [DISPLAY] to see it on the TV screen.
• You cannot pause the one-touch timer recording.
• If VCR one-touch timer recording is completed during
DVD playback or recording, the VCR will be in stop
mode and the DVD keeps the current mode.
• Unlike a timer recording, you can perform the following
operations during the one-touch timer recording.
- Turning the power to the standby mode to stop one-
touch timer recording.
- Using [REC] or [C] on the remote control.
• When the one-touch timer recording is finished and the
power is in the standby mode, the unit will switch to
the timer standby mode automatically if a timer
recording has been programmed. Press [TIMER SET] to
cancel the timer standby mode for using the unit
continuously.
• This function is available only when the unit is
connected by the VIDEO OUT jack.
82 EN EN
VCR FUNCTIONS
(0:30) (1:00)
(7:30)

Index Search

An index mark will be assigned at the beginning of each
recording you make. You may skip to a specific marked
point by following the steps below.
Press [VCR] first.
1) Press [SEARCH] so that "INDEX SEARCH" menu
appears.
2) Using [the Number buttons], enter the number of
recordings you wish to skip within 30 seconds.
INDEX SEARCH
03
3) Press [E ], [ D] to start index search.
If you want to go in the forward direction, press [ D].
If you want to go in the reverse direction, press [E ].
After index search, the VCR will play back the cassette
tape automatically.
CURRENT PROGRAM
Beginning
of tape
Pro.1 Pro.2
02 01 01
Note
• You can make the index mark up to 20.
• This function is available only when the unit is
connected by the VIDEO OUT jack.
End
of tape
Pro.3 Pro.4 Pro.5
02 03
INDEX MARK