Choosing The Recording Format Of A Brand-New; Reformatting A Disc Manually - FUNAI ZV427FX4 Owner's Manual

Reformatting a Disc Manually

If you are using a DVD-RW, you can format the disc by performing "Format". You can format DVD-RW for either video
mode recording or VR mode recording.
Note
When you reformat the disc, the contents of the disc
are erased.
For DVD-RW, make sure that the recording format is
set to the desired mode. (See steps 1 to 6 in

"Choosing the Recording Format of a Brand-New

DVD-RW" on page 59.)
This unit may not be able to reformat a disc that is not
previously formatted by this unit (e.g. DVD disc
formatted by PC or another recorder).
60 EN EN
FORMATTING A DISC
Insert a recordable disc.
1
2
3
4
5
6
Press [SETUP].
Use [K / L] to select "DVD Menu",
then press [OK].
Setup
General Setting
Timer Programming
Title List
DVD Menu
Use [K / L] to select "Format", then
press [OK].
e.g.) VR mode DVD-RW
DVD Menu
Format
Finalize
Disc Protect OFF ON
Delete All Playlists
Use [K / L] to select "Start", then
press [OK].
DVD Menu
Format
Finalize Start
Disc Protect OFF ON Format Mode
Delete All Playlists
Selection menu will appear and prompt you to
confirm.
Use [K / L] to select "Yes", then press
[OK].
Formatting will start.
If you want to cancel formatting, select "No".
Are you sure?
Yes
No
Formatting is completed.
"100%" is indicated.
Formatting 100%