Before Recording; Setting For Auto Chapter; Recording Audio Select (Xp); Setting Aspect Ratio For Video Mode Recording - FUNAI ZV427FX4 Owner's Manual

Setting for Auto Chapter

You can set a specified time for chapter marks.
1) Press [SETUP] and use [K / L] to select "General
Setting", then press [OK].
"General Setting" menu will appear.
2) Use [K / L] to select "Recording", then press [OK].
"Recording" menu will appear.
3) Use [K / L] to select "Auto Chapter", then press [OK].
4) Use [K / L] to select a desired time option, then
press [OK].
Auto Chapter
OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
5) Press [SETUP] to exit.
Note
• The interval for auto chapter may be up to two
minutes different from the time option you set.
• A blank chapter may be created depending on the
remaining time of the disc.

Recording Audio Select (XP)

You can enjoy high quality sound recording. This function
works only when the recording mode is set at XP.
1) Press [SETUP] and use [K / L] to select "General
Setting", then press [OK].
2) Use [K / L] to select "Recording", then press [OK].
"Recording" menu will appear.
3) Use [K / L] to select "Recording Audio Select (XP)",
then press [OK].
4) Use [K / L] to select "PCM" or "Dolby Digital", then
press [OK].
Re ording Audio Sele t (XP)
PCM
Dolby Digital
PCM:
Records PCM audio for the best quality sound.
Dolby Digital:
Records Dolby Digital audio for good quality sound.
5) Press [SETUP] to exit.
28 EN EN

BEFORE RECORDING

Note
"PCM" stands for Pulse Code Modulation. It changes
analog sound to digital sound without compressing
audio data.
When the recording mode is set at other than XP, the
unit records "Dolby Digital" audio automatically even
if you selected "PCM".
Setting Aspect Ratio for Video Mode
Recording
You can set aspect ratio for video mode recording.
1) Follow step 1 to 2 on "Recording Audio Select(XP)".
2) Use [K / L] to select "Aspect Ratio (Video mode)",
then press [OK].
3) Use [K / L] to select your desired setting, then press
[OK].
Aspe t Ratio (Video mode)
Auto
4 : 3
16 : 9
Auto (default): It will be recorded with whichever the
ratio that the program you started to record are
broadcasted with.
4:3 : Recorded in the aspect ratio of 4:3.
16:9 : Recorded in the aspect ratio of 16:9.
4) Press [SETUP] to exit.
Note
For DVD-RW VR mode, the image will be recorded in
whichever the ratio that the program you record are
broadcasted with, regardless of the "Aspect Ratio
(Video mode)" setting.