Heartway Medical Products PF2 User Manual page 9

6. Installing the Batteries (y
ou can omit this step if your scooter is assembled
with the batteries)
Lift off the shroud from the base frame slightly (See Fig 9). The shroud is attached by
velcro and lifts off simply. Disconnect the cable connectors to totally separate the
shroud from the base frame to avoid scratching when assembling the batteries. (See
Fig 10). Connect each battery harness ring terminal to the battery terminal posts,
observing battery positive and negative coding. Red is positive, black is negative.
(See Fig 11)
Velcro
Shroud (Fig 9) Disconnect (Fig 10)
Note: There is a battery circuit diagram labeled on the backside of the shroud. Please
refer this diagram before you assemble the battery.
/ pole
Connected
(Fig 11)
9