Operation; Button Functions - Heartway Medical Products PF2 User Manual

OPERATION

The power scooter is simple to operate. However , we recommend that you read
carefully the following instructions to become familiarized with your new vehicle.
A Word of Caution:
Before you turn the power on, always be aware of the environment that surrounds you
to select your desired speed. For indoor environments we recommend that you select
the slowest speed setting. For outdoor operation of this vehicle we recommend that
you select a speed that is comfortable for you to control it safely.
The following steps are required to operate your vehicle safely with the controller
(See Fig 19).
Remaining
Battery Meter
Headlight
Switch Button
Left Signal Light
Switch Button

Button functions

1. Remaining Battery Meter: When your scooter is switched on, the needle on the
meter will move across the scale from the left 'red' sector towards the 'green'
sector, indicating the state of charge in your batteries. As the power is used up in
your batteries, the needle will move towards the 'red' sector indicating the state of
charge at that precise time. When the needle is fully over to the right, the batteries
are fully charged. When the needle falls towards the red sector, your batteries are
losing power, but you will still have power to spare. When the needle falls into the
red sector, your batteries are low in power and need to be recharged. It is wise to
Horn Button
(Fig 19)
Manual
Speed Adjuster
Power ON/OFF
Light
Hazard Light
Switch button
Right Signal Light
Switch Button
13