Nefit ModuLine 300 Operating Manual page 7

Request information
Via this button the following information is
successively displayed:
– the set temperature during the day program
or manual operation;
– the boiler water pressure
– the flow temperature of the boiler;
– the operating mode.
Set-up time
Use the button "time" and the set-up button to
change the time.
Keep the button "time" pressed and turn the
set-up button to change the hours.
Release the button "time".
Keep the button "time" pressed again and
turn the set-up button to change the
minutes.
Set-up temperature levels
Use the button "temperature" to change a
temperature level.
Press the button "temperature" briefly.
Press the button "temperature" to select the
desired temperature level.
Keep the button "temperature" pressed and
turn the set-up button to adjust the
temperature (→ also paragraph 4.1).
1) This information is only shown, if the boiler supports this function.
Technical specifications are subject to change without prior notice.
Operating manual ModuLine 300 • edition 12/2010
1)
;
Dagprogramma CV-1
21.0
16.0
ma 09:18 18.0°C T2
Fig. 6 Request information
Tijd: Stel uren in
--:--
Druk toets onder pijl
en draai ronde knop
Fig. 7 Set-up time
Temp. nacht (T1)
16.0°C
Druk toets onder pijl
en draai ronde knop
Fig. 8 Set-up temperature levels
Brief outline
Nefit B.V. • http://www.nefit.nl
1
7