Service Menu 3.1 - General Service-Settings; Set-Up Language; Pid-Setting - Nefit ModuLine 300 Operating Manual

8 Service menu 3.1 – General service-settings
8.1

Set-up language

Select here de desired language:
"Nederlands" or "Duits".
Factory setting = Nederlands (Dutch)
8.2

PID-setting

When the thermostat is set-up for room
temperature control, you can adjust the
heating rate of the heating system to the
house.
Change the PID-value only if the set
room temperature is highly exceeded
when heating up the house.
There are three possible settings:
PID 1 The boiler heats up as quickly as
possible (factory setting).
PID 2 The boiler heats up low key.
PID 3 The boiler heats up slowly.
Technical specifications are subject to change without prior notice.
Operating manual ModuLine 300 • edition 12/2010
Service menu 3.1 – General service-settings
Fig. 38 Set-up language
Fig. 39 PID-setting
Servicemenu 3.1
--------
Taal wijzigen?
Nederlands
Servicemenu 3.2
--------
PID-instelling?
1
8
Nefit B.V. • http://www.nefit.nl
25