Commissioning The Thermostat; Setting The Date And Time; After A Power Failure - Nefit ModuLine 300 Operating Manual

3 Installation
3.4

Commissioning the thermostat

Turn on the boiler. As a result, the
thermostat is also provided with electricity.
The thermostat establishes connection with
the boiler. On the display appears the text:
"Even geduld aub".
3.5

Setting the date and time

At the initial commissioning or after the
thermostat was not supplied with electricity
for more than 10 hours, the date and time
must be set.
Follow the instructions on the display to set
the date and time.
3.6

After a power failure

After a power failure all settings are retained.
Except for the date and time. These are
retained for 10 hours. Provided, however, that
the thermostat has been connected for at
least 4 hours.
Check the date and time setting according
to paragraph 3.5.
Nefit B.V. • http://www.nefit.nl
14
Datum: Stel jaar in
--.--.--
Druk toets onder pijl
en draai ronde knop
Fig. 19 Set-up date and time
Technical specifications are subject to change without prior notice.
Operating manual ModuLine 300 • edition 12/2010