Nefit ModuLine 300 Operating Manual page 3

6.7 Reset operating settings to factory settings
7 Service menu
7.1 Access code
8 Service menu 3.1 - General service-settings
8.1 Set-up language
8.2 PID-setting
8.3 Calibrate room temperature
8.4 Calibrate time
8.5 Do you use a solar cylinder module
8.6 Set-up heating circuit
8.7 Reset factory settings
9 Remedy malfunctions
9.1 Remedy malfunctions
9.2 Remedy malfunctions (for installer)
10 Technical data
11 Glossary
12 Fill in schedules
12.1 Fill in schedule time program
Safety regulations
Never remove the thermostat.
Avoid high temperatures, moisture and dusty environment.
Do not use water or cleaning agents when cleaning.
This can lead to short circuit or damage of the thermostat.
Interrupt the power supply of tthe boiler before starting the
installation.
Technical specifications are subject to change without prior notice.
Operating manual ModuLine 300 • edition 12/2010
Contents
23
24
24
25
25
25
26
26
27
27
27
28
28
29
31
32
33
33
Nefit B.V. • http://www.nefit.nl
3