Set-Up Time Program - Nefit ModuLine 300 Operating Manual

4

Set-up time program

4.2 Set-up time program
Press the button "menu".
The menu time program appears in the
display.
Press the button "OK" to enter the menu.
Select with the set-up button "Nieuw
klokprogramma invoeren?".
Press the button "OK".
Keep the button "OK" pressed and turn the
set-up button to confirm the question
asked.
Enter switching points
Keep the button "day" pressed and select
with the set-up button the desired day or
day-series (Fig. 22).
Keep the button "time" pressed and turn the
set-up button to set-up the desired time
(Fig. 23).
Keep the button "temperature" pressed and
select with the set-up button the desired
temperature level (Fig. 24). The switching
point is graphically shown in the display.
Repeat these steps for the other switching
points.
Nefit B.V. • http://www.nefit.nl
16
Klokprog. invoeren Klokprog. invoeren
09:18
21.0 21.0
21
5°C
16.0 16.0
Fig. 22 Set-up day time program
Klokprog. invoeren Klokprog. invoeren
09:18
21.0 21.0
21
5°C
16.0 16.0
Fig. 23 Set-up time in time program
Klokprog. invoeren Klokprog. invoeren
09:18
21.0 21.0
21
5°C
16.0 16.0
Fig. 24 Set-up temperature time program
Technical specifications are subject to change without prior notice.
Operating manual ModuLine 300 • edition 12/2010
06.01.08
06.01.08
06.01.08