ATEN Master View CS-82A User Manual page 12

n Scan Interval
1
3 secs
2
5 secs
3
10 secs
4
20 secs
Once scanning begins, it continues until you press the
[Spacebar] to exit Auto Scan Mode. The port that has the KVM
focus at the time scanning stopped remains active.
Note: While Auto Scan Mode is in effect, the console will not
function normally. You must exit Auto Scan Mode (by
pressing the [Spacebar]) in order to regain normal
control of the console.
M
Hotkey Summary Table
Combination
[LCtrl] [LCtrl] or Toggles access between the computers.
[RCtrl] [RCtrl]
[LShift] [RShift] Starts Auto Scan Mode.
[LShift] [RShift] [S] [n]
Changes the scan interval.
[Spacebar] Exits Auto Scan Mode.
Action
- 10 -
2002-09-19