Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for ATEN CS82U
Summary of Contents for ATEN CS82U
- Page 1 PS/2-USB KVM Switch CS82U / CS84U User Manual www.aten.com...
-
Page 2: Fcc Information
CS82U / CS84U User Manual FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 3: User Information
CS82U / CS84U User Manual User Information Online Registration Be sure to register your product at our online support center: International http://support.aten.com North America http://www.aten-usa.com/product_registration Telephone Support For telephone support, call this number: International 886-2-8692-6959 China 86-10-5255-0110 Japan 81-3-5615-5811 Korea... -
Page 4: Package Contents
© Copyright 2010 – 2012 ATEN® International Co., Ltd. Manual Date: 2012-02-06 ATEN and the ATEN logo are registered trademarks of ATEN International Co., Ltd. All rights reserved. All other brand names and trademarks are the registered property of their respective owners. -
Page 5: Table Of Contents
CS82U Front View........ - Page 6 CS82U / CS84U User Manual Invoking HSM ......... . . 17 Alternate HSM Invocation Keys .
-
Page 7: About This Manual
CS82U / CS84U User Manual About this Manual This User Manual is provided to help you get the most from your CS82U / CS84U. It covers all aspects of installation, configuration and operation. An overview of the information found in the manual is provided below. -
Page 8: Conventions
For information about all ATEN products and how they can help you connect without limits, visit ATEN on the Web or contact an ATEN Authorized Reseller. Visit ATEN on the Web for a list of locations and telephone numbers: International http://www.aten.com... -
Page 9: Introduction
Since the CS82U / CS84U intercepts keyboard input directly, it will work on multiple computing platforms. There is no better way to save time and money than with a CS82U / CS84U installation. Since a single console manages all of the computers, the CS82U / CS84U setup: eliminates the expense of having to purchase separate console components for each computer;... -
Page 10: Features
CS82U / CS84U User Manual Features One PS/2-USB VGA console controls two (CS82U) or four (CS84U) VGA interface computers. Computer selection via front panel pushbuttons, hotkeys, and mouse Multiplatform support – Windows 2000/XP/Vista/7, Linux, Mac, and Sun* Superior video quality – 2048 x 1536; DDC2B Video DynaSync –... -
Page 11: Hardware Requirements
Only KVM cable sets which are specifically designed to work with this switch may be used to link to the computers. Two (CS82U) or four (CS84U) cable sets are provided with this package. To order further cable sets, please see table,... -
Page 12: Operating Systems
CS82U / CS84U User Manual Operating Systems Supported operating systems are shown in the table, below: Version Windows 2000 / XP / 2003 / 2008 / Vista / 7 Linux RedHat 9.0 and higher SuSE 10 / 11.1 and higher Debian 3.1 / 4.0... -
Page 13: Components
Chapter 1. Introduction Components CS82U Front View 1 & 2 CS84U Front View 1 & 2... - Page 14 CS82U / CS84U User Manual Component Description Port For manual port selection: Selection Press and release a port selection pushbutton to bring the Pushbuttons KVM focus to the computer attached to its corresponding port. The Port LED lights bright orange.
-
Page 15: Cs82U Rear View
Chapter 1. Introduction CS82U Rear View CS84U Rear View... - Page 16 Port this port. KVM Port Section The custom KVM cable sets that link the CS82U / CS84U to your computers plug in here. Each KVM port section is comprised of a single female SPHD- 18 port, which incorporates both the USB, PS/2 and VGA connection.
-
Page 17: Hardware Setup
Keyboard Power On function. Cable Connections To set up your CS82U / CS84U installation, refer to the installation diagram on the following page (the numbers in the diagrams correspond to the steps, below), and do the following: 1. -
Page 18: Installation Diagram
CS82U / CS84U User Manual Installation Diagram and / or CS84U Rear View (Optional) Custom KVM Cable Set Custom KVM Cable Set... -
Page 19: Basic Operation
Chapter 3 Basic Operation Overview There are three convenient methods to access the computers: Manual – which involves pressing the port selection pushbuttons located on the unit’s front panel; Mouse – which involves clicking the scroll wheel of the USB mouse; and Hotkey –... -
Page 20: Mouse Port-Switching
Each KVM port section on the CS82U / CS84U switch is assigned a port number. (1 or 2 for the CS82U; 1 to 4 for the CS84U). The port numbers are marked on the rear panel of the switch (see page 7 for details). -
Page 21: Alternative Manual Port Selection Settings
Chapter 3. Basic Operation Alternative Manual Port Selection Settings When Hotkey Setting Mode has been activated, pressing [S] will invoke the alternative front panel pushbutton manual port selection functions as follows (see page 21, also): Press a port selection pushbutton once to bring the KVM focus to the computer attached to its corresponding port. - Page 22 CS82U / CS84U User Manual This Page Intentionally Left Blank...
-
Page 23: Hotkey Operation
[Enter] the KVM focus to the next port on the installation (1 to 2; 2 to 1 for the CS82U; 1 to 2; 2 to 3; 3 to 4; 4 to 1 for the CS84U). Going Directly to a Port... -
Page 24: Auto Scanning
CS82U / CS84U User Manual Auto Scanning The CS82U / CS84U’s Auto Scan feature automatically cycles the KVM focus through the computer ports at regular intervals. This allows you to monitor the computer activity without having to take the trouble of switching from port to port manually. -
Page 25: Hotkey Setting Mode
Chapter 4. Hotkey Operation Hotkey Setting Mode Hotkey Setting Mode is used to set up your CS82U / CS84U switch configuration. All operations begin with invoking Hotkey Setting Mode (HSM). Invoking HSM To invoke HSM do the following: 1. Press and hold down [Num Lock]. -
Page 26: Alternate Hsm Invocation Keys
CS82U / CS84U User Manual Alternate HSM Invocation Keys An alternate set of HSM invocation keys is provided in case the default set conflicts with programs running on the computers. To switch to the alternate HSM invocation set, do the following: 1. -
Page 27: Keyboard Operating Platform
Chapter 4. Hotkey Operation Keyboard Operating Platform The CS82U / CS84U’s default port configuration is for a PC compatible keyboard operating platform. If your console uses a PC compatible keyboard and you have a Mac attached to a port, for example, you can change the port’s keyboard operating platform configuration so that the PC compatible keyboard emulates the Mac keyboard. -
Page 28: Hotkey Buzzer Control
Upgrade Mode is in effect. Note: To exit Firmware Upgrade Mode, you must power off the switch. Restore Default Settings To reset the CS82U / CS84U to its default hotkey settings, do the following: 1. Invoke HSM (see page 17). 2. Press [R] [Enter]. -
Page 29: Video Dynasync
Chapter 4. Hotkey Operation Video DynaSync To invoke Video DynaSync, ATEN’s exclusive technology that eliminates boot-up display problems and optimizes resolution when switching between ports, do the following: 1. Invoke HSM (see page 17). 2. Press [D]. Mouse Port-switching To enable/disable the Mouse Port-switching function, do the following 1. -
Page 30: Hsm Summary Table
CS82U / CS84U User Manual HSM Summary Table After invoking HSM (see page 17), key in one of the following keys to perform the corresponding function: Function Toggles between the default ([Num Lock] [-]) and alternate ([Ctrl] [F12]) HSM invocation keys. -
Page 31: Keyboard Emulation
Chapter 5 Keyboard Emulation Mac Keyboard The PC compatible (101/104 key) keyboard can emulate the functions of the Mac keyboard. The emulation mappings are listed in the table below. PC Keyboard Mac Keyboard [Shift] Shift [Ctrl] Ctrl [Ctrl] [1] [Ctrl] [2] [Ctrl] [3] [Ctrl] [4] [Alt]... -
Page 32: Sun Keyboard
CS82U / CS84U User Manual Sun Keyboard The PC compatible (101/104 key) keyboard can emulate the functions of the Sun keyboard when the Control key [Ctrl] is used in conjunction with other keys. The corresponding functions are shown in the table below. -
Page 33: The Firmware Upgrade Utility
2. Choose the Firmware Upgrade Package you want to install (usually the most recent), and download it to your computer. 3. Disconnect the CS82U / CS84U from your KVM installation and power it off . Connect one of the custom KVM cable set’s Type A USB connectors to a USB hub port on your computer. - Page 34 CS82U / CS84U User Manual 4. At the other end of the custom KVM cable set, connect the SPHD connector to the Port 1 KVM section. 5. Invoke Firmware Upgrade Mode (see Firmware Upgrade Mode, page 20). The front panel LEDs flash to indicate that Firmware Upgrade Mode is in...
-
Page 35: Starting The Upgrade
6. The Firmware Upgrade Utility Starting the Upgrade 1. Run the downloaded Firmware Upgrade Package file – either by double clicking the file icon, or using a command line to enter the full path. The Firmware Upgrade Utility Welcome screen appears: 2. - Page 36 CS82U / CS84U User Manual 4. As you select a device in the list, its description appears in the Device Description panel.After you have made your device selection(s), Click Next to perform the upgrade. If you enabled Check Firmware Version, the Utility compares the device’s firmware level with that of the upgrade files.
-
Page 37: Upgrade Succeeded
1. Press and hold the Port 1 selection pushbutton. While you are holding the pushbutton, connect the CS82U / CS84U to the computer using the USB cable of the custom cable set (see diagram, page 25) to enter Firmware Upgrade Mode. - Page 38 CS82U / CS84U User Manual This Page Intentionally Left Blank...
-
Page 39: Appendix
Appendix Safety Instructions Read all of these instructions. Save them for future reference. Follow all warnings and instructions marked on the device. Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will result. Do not use the device near water. - Page 40 CS82U / CS84U User Manual If an extension cord is used with this device make sure that the total of the ampere ratings of all products used on this cord does not exceed the extension cord ampere rating. Make sure that the total of all products plugged into the wall outlet does not exceed 15 amperes.
-
Page 41: Technical Support
Appendix Technical Support International For online technical support – including troubleshooting, documentation, and software updates: http://support.aten.com For telephone support, Telephone Support, page iii North America Email Support support@aten-usa.com Online Troubleshooting http://www.aten-usa.com/support Technical Documentation Support Software Updates Telephone Support 1-888-999-ATEN ext 4988 When you contact us, please have the following information ready beforehand: Product model number, serial number, and date of purchase. -
Page 42: Specifications
CS82U / CS84U User Manual Specifications Function CS82U CS84U Computer Connections Port Selection Front Panel Pushbuttons; Hotkey, USB Mouse Connectors Console Keyboard 1 x USB Type A Female (Black), Ports 1 x 6-pin Mini-DIN Female (Purple) Video 1 x HDB-15 Female (Blue) -
Page 43: Troubleshooting
Appendix Troubleshooting Operation problems can be due to a variety of causes. The first step in solving them is to make sure that all cables are securely attached and seated completely in their sockets. In addition, updating the product’s firmware may solve problems that have been discovered and resolved since the prior version was released. - Page 44 CS82U / CS84U User Manual Symptom Possible Cause Action Monitor does not Some graphics Power off all devices on the display after KVM cards are installation (see safety note, cable set is hot incompatible with page 31); power off the switch;...
-
Page 45: Hotkey Default Settings
Appendix Hotkey Default Settings The hotkey factory default settings are as follows: Setting Hotkey Default Port Switching [Scroll Lock] [Scroll Lock] Invoking HSM [Number Lock] [-] Auto Scan Interval [Scroll Lock] 5 seconds [Scroll Lock] [A] [Enter] Keyboard Operating Platform [F10] PC Compatible Mouse Emulation... -
Page 46: About Sphd Connectors
CS82U / CS84U User Manual About SPHD Connectors This product uses SPHD connectors for its KVM and/or Console ports. We have specifically modified the shape of these connectors so that only KVM cables that we have designed to work with this product can be connected.