Download Print this page


Operating Manual
A17-5 ECO / A19-5 ECO
Downloaded from Manuals


   Summary of Contents for Fujitsu A17-5 ECO

  • Page 1

    Operating Manual Display A17-5 ECO / A19-5 ECO Downloaded from Manuals...

  • Page 2

    Service Desk • your sales partner • your sales office The latest information about our products, useful tips, updates etc. is available on our website: "" Further information can be found in the Service Desk list: "" Downloaded from Manuals...

  • Page 3

    Downloaded from Manuals...

  • Page 4

    Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may infringe the rights of such owner. For further information see Order-No. Fujitsu Technology Solutions: A26361-K1338-Z220-1-7619, Edition 1 Downloaded from Manuals...

  • Page 5: Table Of Contents

    FUJITSU A17-5 ECO/A19-5 ECO Operating Manual Your LCD screen... Important notes Getting started Operation Notes on ergonomic colour adjustment Troubleshooting Explanatory information about standard ISO 9241-3 Technical data Downloaded from Manuals...

  • Page 6

    All other trademarks referred to in this publication are trademarks of the respective owners, whose legal protection is hereby recognised. Copyright © Fujitsu Technology Solutions GmbH 2009 All rights, including rights of translation, reproduction by printing, copying or similar methods, of the whole document or parts thereof, are reserved.

  • Page 7

    Contents Contents Your LCD screen............... . Target group .

  • Page 8

    Contents A26361-K1338-Z220-1-7619, edition 1 Downloaded from Manuals...

  • Page 9: Your Lcd Screen

    Your LCD screen... Your LCD screen... has a whole range of useful features and functions, e.g.: • TFT display (Thin Film Transistor; active matrix) • minimal space requirements thanks to slim casing • optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour purity right into the corners) •...

  • Page 10: Further Information

    "Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "" • Names of CDs, DVDs and titles or designations of other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety" Manual indicates a key on the keyboard, e.g:...

  • Page 11: Important Notes

    Important notes Important notes Importantnotes Notes In this chapter you will find information regarding safety which it is essential to take note of when working with your device. Safety instructions This device complies with the relevant safety regulations for data processing equipment, including electronic office machines for use in an office environment.

  • Page 12: Power Cable

    Important notes • The device may only be operated in the wide format (0° landscape mode). The buttons of the control panel are located at the bottom in the middle of the monitor. • Store this manual close to the device. If you pass the device on to third parties, you should pass this manual on with it.

  • Page 13: Ce Marking

    These savings could also prevent the emission of 20 million tons of carbon dioxide into the atmosphere - equivalent to the discharge from 5 million cars. As an Energy Star Partner, Fujitsu Technology Solutions GmbH has determined that this product meets the Energy Star guidelines for energy efficiency.

  • Page 14: Disposal And Recycling

    1250E. Arques Avenue Executive Yuan, R.O.C. Sunnyvale, CA 94085, U.S.A. "" Contact: Bernd Henning Phone No.: (408) 329-6737 Fax No.: (408) 746-8299 Information on this subject is also available on the Internet at "". A26361-K1338-Z220-1-7619, edition 1 Downloaded from Manuals...

  • Page 15: Getting Started

    Getting started Getting started Unpacking and checking the delivery The display surface of the device is sensitive to pressure and scratches. Always hold the device by the casing! The complete device package includes: • one monitor • one audio cable •...

  • Page 16: Setting Up An Ergonomic Video Workstation

    Getting started Setting up an ergonomic video workstation ► Do not position the video workstation opposite a window (1). ► Position the monitor outside the reach of a light source (1). ► Position the keyboard where it is easiest to reach (1). A26361-K1338-Z220-1-7619, edition 1 Downloaded from Manuals...

  • Page 17: Adjusting The Inclination

    Getting started ► Position the monitor so that the eye distance to the screen (1) is around 50 cm. 50 cm ► Position the monitor for optimum viewing (1). The monitor should under no circumstances fall outside the permissible viewing space (2). Depending on the situation, it may be advisable to use a swivel arm or wall bracket (VESA FPMPMI), which are available from specialist dealers.

  • Page 18: Removing Monitor Base

    Getting started Removing monitor base Before you can use a swivel arm or a wall bracket, you must remove the monitor base. The display surface is susceptible to scratching! ► Switch off the monitor and pull the power plug out of the power socket. ►...

  • Page 19: Connecting The Device

    Getting started Connecting the device Please observe the safety information in "Important notes", Page CE conformance and optimum picture quality are guaranteed only if you use the data cables supplied. ► Switch off the monitor and the computer. ► Disconnect the power plug from the computer. Connecting cables to the monitor The data cable supplied has two 15-pin D-SUB connectors for connection to the monitor and to the computer.

  • Page 20: Connecting Cables To The Computer

    Getting started Connecting cables to the computer Information on the computer connections and interfaces is contained in the operating manual for your computer. ► Connect the data cable to the (active) monitor port on the computer and secure the plug-in connection by tightening the safety screws. ►...

  • Page 21: Operation

    Operation Operation Switching the device on and off 1 = Buttons for the OSD menu (On-Screen Display) 2 = Power supply indicator 3 = ON/OFF switch Press the buttons upwards from below. The colour of the LED indicator changes as follows: LED indicator Status Blue...

  • Page 22: Notes On Power Management

    Operation Notes on power management If the computer is equipped with power management (power-saving mode), then this function can be fully supported by the monitor. The monitor does not distinguish between the individual energy-saving modes used by the computer (standby mode, suspend mode and OFF mode), as it is capable of immediately switching into the mode with the highest energy-saving effect.

  • Page 23: Changing The Monitor Settings

    Operation Changing the monitor settings When putting the monitor into operation for the first time, the screen display should be optimally adapted to the display adapter used. Changing the monitor settings with the buttons of the control panel The buttons of the control panel have two functions. With the OSD menu not activated, you can make the following settings directly: 1 = Buttons for the OSD menu (On 3 = ON/OFF switch...

  • Page 24: Changing The Monitor Settings Using The Osd Menu

    Operation Locking the OSD menu The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings. ► Press and hold the SELECT/MENU button for a few seconds while you switch on the monitor with the ON/OFF switch. The Action was executed message appears.

  • Page 25

    Operation ► Press the button to SELECT/MENU activate the OSD menu. The main menu appears, with icons for the setting functions. The first icon, (Brightness/Contrast), is highlighted and the associated functions are visible in the right-hand menu field. ► Press the Forwards / button or the Back / button to highlight another...

  • Page 26: Osd Menu Functions

    Operation OSD menu functions The OSD menu for analogue monitor operation is described below. During digital operation some functions are not available, they are not needed because of the digital transmission technology being used. Adjusting the brightness and contrast Call up the Brightness/Contrast setting window Brightness Set the brightness of the display With this function you change the brightness of the background lighting.

  • Page 27: Adjusting The Volume

    Operation Adjusting the volume Call the Audio setting window Volume Set the volume for playback with the integrated loudspeakers Mute Switch the loudspeakers off or on Setting the colour temperature and colours Call the Colour setting window Select the colour temperature The "warmth"...

  • Page 28: Displaying Information

    Operation Configuring function settings in the Advanced menu Open the Advanced settings window DDC/CI Activate/deactivate the DDC/CI function On = The DDC/CI function is activated (standard setting) Off = The DDC/CI function is deactivated Resolution Notifier Monitor information. The optimum resolution for this monitor is 1280 x 1024 pixels.

  • Page 29: Notes On Ergonomic Colour Adjustment

    Notes on ergonomic colour adjustment Notes on ergonomic colour adjustment If you select colours for the monitor in your application programmes, take note of the information below. The primary colours blue and red on a dark background do not produce the minimum required contrast of 3:1 and are therefore not suitable for continuous text and data entry.

  • Page 30: Troubleshooting

    Troubleshooting Troubleshooting Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you cannot solve the problem, please contact our Service Desk. Having this problem? Check the following points: No screen display ►...

  • Page 31

    Troubleshooting Having this problem? Check the following points: Picture disturbances (vertical lines) ► Press the EXIT / AUTO button to perform auto-adjustment of the screen. Picture disturbances (horizontal lines, picture ► Press the button to perform EXIT / AUTO noise) auto-adjustment of the screen.

  • Page 32: Explanatory Information About Standard Iso 9241-3

    Explanatory information about standard ISO 9241-3 Explanatory information about standard ISO 9241-3 Bright or dark pixels It is not possible to guarantee an absolutely fault-free screen monitor with current production technology. A few isolated permanently bright or dark pixels (picture elements) may be present.

  • Page 33: Technical Data

    Technical data Technical data Condensation is not permitted, neither in the rated range of operation nor in the limit range of operation. A17-5 ECO A19-5ECO Dimensions and weight Visible diagonals 43 cm 48 cm Dot pitch 0.264 mm 0.294 mm...

  • Page 34: Vesa-ddc-compatible Vga Interface

    Technical data Ambient conditions Environment class 3K2, DIN IEC 721 Rated range of operation 15 °C ..35 °C Humidity 20 % ..85 % Limit range of operation 5 °C ..35 °C Humidity 20 % ..85 % VESA-DDC-compatible VGA interface Your monitor is equipped with a VESA-DDC-compatible VGA interface.

  • Page 35: Sub D Port

    Technical data SUB D port Meaning Video input red Video input green Video input blue Ground Ground Video ground red Video ground green Video ground blue +5 V (DDC) Sync. ground Ground DDC Data H. sync V. sync DDC Clock A26361-K1338-Z220-1-7619, edition 1 Downloaded from Manuals...

This manual also for:

A19-5 eco

Comments to this Manuals

Symbols: 0
Latest comments: