Table of Contents
Advertisement
Section 1: Installation of
the Transmitter Batteries
Install 4 AA alkaline batteries into the transmitter,
following the instructions provided for your radio system.
Section 2: Installation of the
7.2V Ni-MH Battery Pack
Turn on your transmitter, making sure the radio is in neutral.
Carefully remove the hatch (scale pilot cockpit).
Install a fully charged 7.2V Ni-MH battery pack into the radio
box. Follow the instructions included with your fast charger to
ensure a safe charge. Plug the battery into the female battery
connector attached to the electronic speed controller.
Section 3: Checking
the Radio System
Ensure the antenna tube is properly placed through the hull.
It may be necessary to slightly pull the antenna tube out to
make certain the radio range is sufficient.
4
Advertisement
Table of Contents
