Direct Transfer To Voice Mailbox; Conference - Mitel 5312 User Manual

Direct Transfer to Voice Mailbox

You can transfer an active call directly to the requested party's voice mailbox using the
(MESSAGE) key or a Speed Call key that contains the Direct Transfer to Voice Mail feature
access code (FAC).
Using the Message key:
1. Press
2. Dial the destination number using any valid dialing method: keypad, DSS/BLF key,
Speed Call or Personal Speed Call key, Call History, Phonebook.
3. Do one of the following:

To complete the Transfer, hang up or press the Release feature key.

To abort the Transfer, press
destination number is dialed.
Using a Speed Call key:
1. Press
2. Dial the feature access code (FAC) or press the Speed Call key that contains the FAC.
3. Dial the destination number using any valid dialing method: keypad, DSS/BLF key,
Speed Call or Personal Speed Call, Call History, Phonebook.
4. Do one of the following:

To complete the Transfer, hang up or press the Release feature key.

To abort the Transfer, press
destination number is dialed.
Note 1: Both the FAC and the destination number can be programmed to a single Speed Call
key.
Note 2: When the phone is in idle state and there are no messages in the mailbox, pressing the
Message key connects you directly to your voice mail.

Conference

To form a Conference when a two–party call is already in place, or to add another party
to an existing Conference:
1. Press
2. Dial the number of the next party.
3. Wait for an answer.
4. Press
(MESSAGE).
(TRANS/CONF).
(TRANS/CONF).
(TRANS/CONF).
- 17 -
Mitel 5312/5324 IP Phones User Guide
(CANCEL) at any time before the last digit in the
(CANCEL) at any time before the last digit in the