Failover Mode; Emergency Calls - Mitel 5312 User Manual

Mitel 5312/5324 IP Phones User Guide

Failover Mode

Make a Call
To make a call using the Line Interface Module line during an IP connection failure:
1. Lift the handset. IP FAIL: ANALOG CALL appears on the display.
2. Dial the number to make the call.
Answer a Call
To answer a call using the Line Interface Module line during an IP connection failur

Lift the handset. IP FAIL: ANALOG CALL appears on the display, and the call is
answered.
Emer gency Calls
WARNING FOR EMERGENCY NUMBER DIALING: Consult your local authorities for
Emergency Numbers and 911 or equivalent service availability in your a
Number dialing should only be performed by picking up the handset and sel
Interface Module key
line is busy, dialing will not
an IP connection may not be supported due to IC
For more information, contact your System Administrator. You can make an Emerge
to your Local Emergency Service using the Line Interface Module line when the IP
connection has failed.
To make an Emergency Call using the Line Interface Module line:
1. Lift the handset.
2. Press the Line Interface Module key.
3. Dial your Local Emergency Number. ANALOG CALL appears on the display.
. If Privacy Mode is enabled and the Line Interface Module key local
occur on the Line Interface Module line. Emergency dialing using
- 46 -
rea. Emergency
P system configuration and country location.
e:
ecting the Line
ncy Call