Using The 5310 Conference Unit Without A Mouse - Mitel 5312 User Manual

Adjust the Conference Unit Volume

Press Volume Up or Volume Down key on the mouse.
Place the Conference Unit in Presentation mode
Presentation Mode is used when only one individual is speaking to a group. If another
member in the group wishes to speak, you must disable Presentation Mode. Presentation
Mode minimizes extraneous noise.
To place the conference unit in Presentation mode

Press Presentation Mode key on the mouse.
Mute the Conference Unit
To mute the conference unit so that conversation in the meeting room cannot be heard
by individuals being conferenced:

Press the Mute button on the mouse or
Exit the Conference

Press Power key on the mouse.

Using the 5310 Conference Unit without a Mouse

Use the procedures below if you 5310 Conference Unit does not have a mouse attached. The
5324 IP Phone will activate the 5310 Conference Saucer when it detects that the Conference
Module has been installed in the back of the phone.
Start a Conference

Press SPEAKER key
Adjust the Conference Unit Volume

Press Volume Up or Volume Down.
Mute the Conference Unit
To mute the conference unit so that conversation in the meeting room cannot be heard by
individuals being conferenced:

Press (MUTE) on the phone.
Exit the Conference

Hang up.
(MUTE) on the phone.
or just start dialing.
- 43 -
Mitel 5312/5324 IP Phones User Guide