THOMSON TG580 Setup And User Manual page 70

6 Thomson Gateway GUI
4 If you want to make a dynamic translation rule (optional) you must specify a Trigger Protocol and
Trigger Port.
5 Click Add.
Edit a port mapping, proceed as follows:
1 Click Edit on the port mapping you want to edit.
2 Make the necessary changes.
3 Click Apply/Add.
Remove a port mapping:
Click Delete on the port mapping you want to remove.
It is not possible to edit/delete the game or application that has been assigned to a computer.
Always make sure that the assigned IP address is unique in the network.
64
As soon as the Thomson Gateway receives outgoing traffic on this trigger port, it will
activate this translation rule. The mapping will be added dynamically in an internal
table of the device and will exist only for the lifetime of this connection.
E-DOC-CTC-20090507-0002 v1.0