Printer Initialization - TSC Alpha-4L Series User Manual

4. The printer will beep sound twice later, then release the FEED button (
indicator becomes
5. Printer will calibrate the sensor and print out the internal settings, then enter the dump
mode.
Note: Turn off/on the power or press FEED button to resume printer from dump mode
to normal printing mode. Please refer to
self-test and dump mode.
 The LEDs will be changed as following figures:
Beep sound twice 
on the printer

4.1.3 Printer Initialization

Printer initialization is used to clear DRAM and restore printer settings to defaults.
Printer initialization is activated by the following procedures.
1. Turn off the printer power switch.
2. Hold on the FEED button (
3. Release the power switch (
Note: In this moment, you should still hold on the FEED button.
4. The printer will beep sound twice later, then release the FEED button (
indicator becomes
5. Printer will restore printer settings to defaults.
Note: Please refer to section 4.5 for printer defaults.
 The LEDs will be changed as following figures:
Beep sound twice 
on the printer
and blinking.
(5 blinks) 
) then turn on the power switch (
) when LED color turn on amber.
and blinking.
(5 blinks) 
- 27 -
sections 4.3 and 4.4

(5 blinks)
).
(5 blinks) 
) when the
for more details of
(5 blinks)  Turn
) when the
 Turn
(5 blinks)