Loading Media In Peel-Off Mode - TSC Alpha-4L Series User Manual

3.3.2 Loading Media in Peel-off Mode

1. Please refer to
3.3.1
roll into the printer.
Note:
Please calibrate the gap/black
mark sensor after loading
media in peel-off mode. Turn
on the printer and open/close
the media cover then it will
calibrate the sensor
automatically.
2. Remove 1~2 labels from
the liner.
3. Press each side of media
cover to close the media
cover and make sure the
media cover closed
correctly.
- 16 -
subsection
to loading the media