Ml810 Switch Port Modules; Ml810 Module Led Designations - GE MultiLink ML810 Instruction Manual

CHAPTER 4: OPERATION
4.5

ML810 Switch Port Modules

4.5.1

ML810 Module LED designations

MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL
An important feature of the Multilink ML810 is the use of Port Modules for flexible mixed-
media connectivity to RJ-45 copper and various fiber media. The first four ports (1,2,3 & 4)
of the Multilink ML810 Switches are fixed RJ-45 copper ports with dual-speed 10/100Mbps
auto-negotiating capability. Additionally the switch can accept up to two Port Modules to
provide the user with up to 6 additional ports (10 total) providing a wide selection of
Ethernet copper and fiber media connections with 10, 100 and 1000Mbps capability and
up to 70km.
Each ML810 Port Module (PM) is individually described in the following sections.
PWR LED= ON, when Power is being supplied to the unit.
RJ45 (Standard)
1= ON (100Mb), OFF (10Mb)
2= ON (Link), BLINKING (Activity)
3= ON (Full Duplex), OFF (Half Duplex)
RJ45 (PoE)
1= ON (100Mb), OFF (10Mb)
2= ON (Link), BLINKING (Activity)
3= ON (Full Duplex), OFF (Half Duplex)
4= ON (PoE device detected)
OPERATION
4–7