GE MultiLink ML810 Instruction Manual page 188

SPANNING TREE PROTOCOL (STP)
Example 12-4: Configuring STP parameters
show stp config
ML810(stp)##
STP CONFIGURATION
-----------------
Spanning Tree Enabled(Global) :
Spanning Tree Enabled(Ports)
Protocol
Bridge ID
Bridge Priority
Bridge Forward Delay
Bridge Hello Time
Bridge Max Age
Root Port
Root Path Cost
Designated Root
Designated Root Priority
Root Bridge Forward Delay
Root Bridge Hello Time
Root Bridge Max Age
show stp ports
ML810(stp)##
STP Port Configuration
-------------------------------------------------------------------------------
Port# Type Priority
-------------------------------------------------------------------------------
01 TP(10/100)
12–8
NO
: YES, 1,2,3,4,5,6,7
: Normal STP
: 80:00:00:20:06:2b:e1:54
: 32768
: 15
: 2
: 20
: 0
: 0
: 80:00:00:20:06:2b:e1:54
: 32768
: 15
: 2
: 20
Path Cost State
128 100 Disabled
CHAPTER 12: SPANNING TREE PROTOCOL (STP)
Des. Bridge
80:00:00:20:06:2b:e1:54
MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL
Des. Port
80:01