History; Commands - GE MultiLink ML810 Instruction Manual

MISCELLANEOUS COMMANDS

17.4 History

17.4.1 Commands

17–8
The commands below may be useful in repeating commands and obtaining history
information.
The command repeats the last command.
!!
!!
The , ,..., commands repeat the nth command (as indicated by a show history).
!1 !2 !n
!<n>
The command displays the last 25 executed commands. If less than 25
show history
commands were executed, only those commands executed are shown.
show history
The history is cleared if the user logs out or if the switch times out. The history count
restarts when the user logs in.
The command displays the current software version.
show version
show version
CHAPTER 17: MISCELLANEOUS COMMANDS
MULTILINK ML810 MANAGED EDGE SWITCH – INSTRUCTION MANUAL