Outside Party - Vertical CONVERSip Edge 300 User Manual

Edge 300 User Guide
M
AKING A
You can dial outside parties by including the outside line access code
before dialing the number (95545000, where 9 is the access code), or by
first selecting the outgoing line if you have direct access from a pre-
programmed button. The default access code for outside lines is 9.
To dial an external number, perform the following steps.
1) Lift the handset, or press the SPEAKER button. The Edge 300
plays the dial tone.
2) Dial the number, preceded by the line access code. If you make a
mistake, press the BACK soft key or CLEAR soft key to re-enter the
digits.
3) Press the DIAL soft button or the DIAL/ANSWR button.
4) If all outside lines are busy, the system plays a fast busy signal,
indicating that there are no lines available.
5) When the called party answers, begin your conversation. Note that
the Edge 300 changes the soft key options on its LCD once the call
connects.
6) When the call is complete, press the END soft key, hang up the
handset, or press the SPEAKER button if using the speakerphone
option.
C
ALL TO AN
95545000
DIAL BACK CLEAR
95545000
HOLD TRANS END
M C
AKING A
O
UTSIDE
- 19 -
O
ALL TO AN UTSIDE
P
ARTY
P
ARTY