Specifications - D&R Airlab User Manual

Specifications

16 SPECIFICATIONS
INPUTS:
Mic inp. bal. 2 kOhm - 128 dBr (+/- 40 dB gain range plus 30 dB of trim range).
Line inp. bal 10 kOhm +/- 20 dB gain range.
Insert level: -10dbV
Telco input (XLR) 10 kOhm bal. +4 dBu nominal.
CMRR: mic input max. gain: 1kHz 85 dB.
Line input max. gain 1 kHz 30 dB.
EQUALISATION:
+/- 12 dB @ 10 kHz shelving.
+/- 12 dB @ 1 kHz bell curve.
+/- 12 dB @ 60 Hz bell curve.
Low Cut: 80 Hz, 12 dB per octave (Mic only)
Low Cut: 200Hz, 6 dB per octave (Telco only).
High Cut: 8 kHz, 6 dB per octave (Telco only).
OUTPUTS:
Program left/right: +6 dBu electronically balanced (transformer balancing optional).
Sub: +6 dBu electronically balanced. (transformer balancing optional)
All other outputs: +6 dBu unbal.
OVERALL:
Frequency response: 20-20.000 Hz +/-0.5 dB.
Harmonic distortion: 0.035% (VCA in, 2nd harm).
Crosstalk: less than -90 dBr.
Noise: -86 dBr.
Headroom: +22 dB internal, 20 dB on outputs.
Mix-Minus rejection: @1 kHz -60 dB.
Channel fader attenuation: 1 kHz, 100 dB.
WEIGHT: Airlab loaded with 16 modules: 50 kg (110 Ib).
DIMENSIONS
Drop though mounting 775 mm Width
When inserting the Airlab in its mounting hole first position the armrest side in the hole and slowly lower the
back side holding the wood ends on either side of the console. Mount the back panel after installation to
finish the job neatly.
Color scheme before 2002:
Front panels: RAL 7012 / 9016
Frame: RAL 7016
Wood ends: RAL 7042
Color scheme after 2002:
Front panels: GISPEN 103
Frame: GISPEN 103
Wood ends: GISPEN 103
Airlab from D&R Phone +31 294 418014, email:
590 mm Depth
info@d-r.nl Page 67