A·X·U·M User Manual
•
Relay out (no input available).
this is selected by GPIO1 jumpers in the place 23 and GPIO2 jumpers in place 56. These
jumpers are located on the I/O cards, close to the RJ45 connectors.
Pin Con. Pair Pin name
1
1A
1
2
1B
3
2A
2
6
2B
5
3A
3
4
3B
7
4A
4
8
4B
S
GND S
Table 11-6: RJ45 pinning in GPO-Relay mode
The figure shows how the jumper selection on the I/O card looks:
Figure 50: GPIO TTL/Relay jumper selection
12 Specifications AXUM digital audio system
12.1 Input/output cards
Mic inputs
: Electronically balanced
: Input impedance 2k Ohm
: Input sensitivity -70dBu up to +20dBu (PAD)
: CMRR MIC inputs: 85dB @ 1kHz, maximum gain
: Phantom is switchable +48 Volts
: Optional is transformer balancing
AXUM from D&R - Phone: +31 294 418014 - E-Mail:
Version 2.5 - 2011-01-28
Function
+Audio 1
Left audio input or output in-phase
-Audio 1
Left audio input or output out-phase
+Audio 2
Right audio input or output in-phase
-Audio 2
Right audio input or output out-phase
GPIO1a
Relay, connecting a&b
GPIO1b
GPIO2a
Relay, connecting a&b
GPIO2b
Shield
GND
Comment
specifications
depends on I/O card
specifications
depends on I/O card
Photo MOS relay
Bidirectional Max.
50V, 200mA
Photo MOS relay
Bidirectional Max.
50V, 200mA
Audio ground and
reference for GP-In
info@d-r.nl
- 82 -