Download Print this page

Specifications - D&R Vision Owner's Manual

4/8 buss console

Advertisement

15.SPECIFICATIONS

Mic input, balanced, RF suppressed, 2 kOhm.
C.M.R.R. at 50 Hz, -70 dB.
INPUTS:
Sensitivity: -80 dBu max for +4 dBu output.
Noise mic: <-129.0 dBu,(A-weighted) 1500hm
Left/Right/Mono outputs, +4dBu bal /-10dBy bal.
OUTPUTS:
(A-weighted). Aux outputs, +4dBu balanced (ground compensated).
All other outputs: +4dBu / -10dBu bal/gnd comp.
High pass filter, -3dB at 50Hz / 100Hz.
EQUALISATION:
H.F. +/- 16dB from 4kHz to 20kHz, shelving.
L.F. +/- 16dB from 20Hz to 500Hz, shelving.
Nominal internal operating level 0dBu (0.775 V).
Freq. response, any input to any output 20Hz - 20kHz, -0.5dB.10Hz -
OVERALL:
100kHz, -3dB.
Total harmonic distortion:
Mic. in-dir. out: 1 kHz: 0.015%, 10kHz: 0.025%.
Mic to line: > 100 dB at 1 kHz.
CROSSTALK:
Channel mute: > 90 dB at 1kHz.
Pan-pot isolation: > 75dB at 1kHz.
DIMENSIONS:
Vision 19": 483x573x212mm / 19"x22.6"x8.3".
Weight: 25kg
Conductive plastic faders.
OPTIONS:
R.I.A.A. pre-amp module for stereo inputs.
SIDEVIEW OF
DESKTOP
VERSION:
SIDE VIEW OF
19" RACK
VERSION:
Line inputs: bal. 10kOhm, -20dB to +20dB.
Return inputs: +4 dBu bal./-10dBy
unbalanced.
Grp./chan. inserts: 10kOhm/470hm
unbalanced. 0dBu.
Stereo machines:+4dBu, -10dBv,
unbalanced.
Noise master fader down: -102dBr
Noise 16 channels routed: -89dBr (A-
weighted).
Noise 24 channels routed: -87dBr (A-
weighted).
Bell curve mids:
H.M.F. +/-16dB from 600Hz to 15kHz belt,
Q1.5.
L.M.F. +/-15dB from 40Hz to 900 Hz
bell,Q1.5
Maximum output: +26dBu into 600 Ohm
bal,
+22dBu unbalanced/ground compensated.
Maximum headroom: not less than +22dB
anywhere in the console.
Channel routing: > 90dB at 1kHz.
Channel fader kilt: > 95dB at 1 kHz.
Aux send kill: > 90dB at 1 kHz.
Vision 46: 1568x768x232 mm /
62"x30.2"x9.1".
Vision 38: 1320x768x232 mm /
52"x30.2"x9.1".
Two/Three frequency oscillator.
VU meter bridge.
Break out panels to allow for Line inputs to
be on XLR.
VISION FRAME CONFIGURATIONS
19" Rack accepts:
14 modules (12- 2, 8-8-2)
Weight: 25kg
Frame 38 accepts
38 modules, 32-8-2, 34-4-2, 36-2,
Weight: 80kg
Frame 46 accepts
46 modules, 40-8-2, 42-4-2, 44-2
Weight: 90kg
(All desktop frames include 2 blanks, no
masters)
Vision manual page:36

Advertisement

loading

This manual is also suitable for:

Vision series