Introduction; Terminal Features; Changing Paper Roll - VeriFone VX 520 User Manual

Introduction

Terminal Features

The illustration below highlights the features of the terminal. The descriptions are detailed below to
help you navigate your way around and there will be references to various buttons on this terminal
throughout the manual. Please note that the chip card insertion slot can be found the terminal keypad
and the multi-directional magnetic card reader is located on the right hand side of the device.
Printer Door Hatch
Serrated Metal Strip
Contactless Card Reader /
Indicator
Terminal Display
Alpha Key
Telephone Style Keypad
Cancel Key
4
www.firstpaymentmerchantservices.co.uk
Internal Thermal Printer
Magnetic Card Reader
ATM-Style Function Keys
Function Keys
Enter Key
Backspace / Clear Key
Chip Card Reader
(under keypad)

Changing Paper Roll

1. Hook your finger under the latch and lift up to swing the paper roll cover open.
2. Remove any partial roll of paper in the printer tray by lifting it up.
3. Loosen the glued leading edge of the new paper roll or remove the protective strip. Unwind the
paper roll past any glue residue.
4. Hold the roll so the paper feeds from the bottom of the roll.
5. Drop the paper roll into the printer tray.
6. Pull paper up past the glue residue.
7. Close the paper roll cover by gently pressing directly on the cover until it clicks shut, allowing a
small amount of paper past the glue residue to extend outside the printer door.
8. Tear the paper off against the serrated metal strip in the printer.
www.firstpaymentmerchantservices.co.uk
5