Toyota Tundra 2005 Owner's Manual page 511

WWW.MANUALS.WS
BASIC FUNCTIONS
After you scroll the screen, the map remains
centered at the selected location until you ac-
tivate another function. The current vehicle
position mark will continue to move along
your actual route and may move off the
"MAP/
screen. When you touch the
VOICE"
button, the current vehicle position
mark returns to the center of the screen and
the map moves as you proceed along the
designated route.
INFORMATION
When you use the one-touch scroll fea-
ture, the current vehicle position mark
may disappear from the screen. Move
the map with a one-touch scroll again or
"MAP/VOICE"
push the button to re-
turn to the current vehicle position map
location display.
6
WWW.MANUALS.WS
"
To set the cursor position as a destina-
tion
You can set a specific point on the map as a
destination using the one-touch scroll func-
tion.
"Enter "
Touch the switch.
The screen changes and displays the map
location of the selected destination and
the route preference. (See " — Entering
destination" on page 38.)
If there is already a preset destination, touch
"Add to " "Replace
the switch or the
"
switch.
When there is already a preset destination,
"Add to "
using the switch to set an addi-
tional destination, will set the new one as the
first point of arrival.
"
To register the cursor position as a
memory point
Memory point registration enables easy ac-
cess to a specific point.
"Mark"
Touch the switch.
"Mark"
When you touch the switch, the fol-
lowing screen appears for a few seconds, and
then the map screen returns.