Toyota Tundra 2005 Owner's Manual page 507

WWW.MANUALS.WS
BASIC FUNCTIONS
Display operation
1U009
You can adjust the angle of the display by
"TILT"
pushing the button. Each push of
"TILT"
the button will tilt the display to
positions 1 , 2 , 3 and then back to
the reverse order.
If you turn the ignition switch off, the display
will automatically move back to position
The display will automatically resume the pre-
vious position when the ignition switch is
turned to the "ACC" or "ON" position.
2
WWW.MANUALS.WS
CAUTION
Take care not to jam your hand while the
display is moving. Otherwise, you
could be injured.
NOTICE
Do not obstruct the display while it is
moving. It could damage your naviga-
tion system.
INFORMATION
Under extremely cold conditions, the
0 in
display may react slowly or operation
sound may become louder.
.
0
Touch switch operation
This system is operated mainly by the
switches on the screen. To prevent dam-
age to the screen, lightly touch switches
on the screen with your finger. When you
touch a switch on the screen, a beep
sounds.
Do not use objects other than your finger
to touch the screen.
INFORMATION
" If the system does not respond to a
touch of a switch, move your finger
away from the screen and then touch
it again.
" You
cannot operate dimmed
switches.
" Wipe off fingerprints on the surface of
the display using a glass cleaning
cloth.
" The displayed image may become
darker and moving images may be
slightly distorted when the display is
cold.
" Under extremely cold conditions, the
map may not be displayed and the
data input by a user may be deleted.
Also, the switches may be harder
than usual to depress.