Toyota Tundra 2005 Owner's Manual page 131

WWW.MANUALS.WS
TO USE THE ANCHOR BRACKET:
1. Remove the passenger head
straint.
130
WWW.MANUALS.WS
'05 TUNDRA_U (L/O 0409)
2. Lightly push down on the top sur-
face of the anchor bracket cover,
re-
then pull it forward to remove.
3. Fix the child restraint system with
the seat belt.
Latch the hook onto the anchor
bracket and tighten the top strap.
For instructions to install the child re-
straint system, see "Child restraint" in this
Section.
CAUTION
Make sure the top strap is securely
latched, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.
Follow all the installation instructions
provided by its manufacturer.
2005 TUNDRA from Sep. '04 Prod. (OM34432U)